Microcement components
Four layers, applied in order: primer, basecoat, topcoat, sealer — plus pigments and sample boards. Order them individually when the surface is already specified, or open the system page to have the quantities calculated.
Twelve pigment colours
The final shade depends on the dosage and on how the topcoat is trowelled. Order a sample board before committing to a colour.
The layers, in sequence
Primer
Two-component polyurethane. Binds dust and regulates absorbency so the basecoat bonds evenly.
Basecoat
The first, coarser layer. Lightly sand-filled to build the surface and correct minor unevenness.
Topcoat
The finish layer that carries the colour and the trowel texture of the final surface.
Sealer
One-component acrylic sealer. Closes the surface and makes it cleanable.
Not sure how much you need?
The microcement system page calculates primer, basecoat, topcoat and sealer from the area you select, then puts the whole set in the cart at once.